Breadcrumbs

User Settings and Basic Navigation

Using Keyek Card Keypad

For optimal use of your Keyek Card, avoid pressing hard on the keypad. Simply place your finger lightly on the desired character and hold until you hear a beep.

The Keyek Card uses a capacitive keypad, meaning pressing hard on the keys won’t affect functionality. Aim to align your finger directly over the character you wish to input, and avoid touching multiple keys at once. A slight delay between pressing a key and the VC responding is normal, as capacitive keypads differ from mechanical ones. You won’t feel any tactile feedback, but the system provides feedback through an audible tone and a visual change on the display when a valid input is registered. For example, this might include a menu update or a “*” appearing when entering your PIN.

Capacitive keypads work by detecting changes in the electrical signal caused by the proximity of your finger. With no moving parts, these keypads are sealed for enhanced durability and security.

Keyek Card Basic Keypad Navigation

The Keyek Card features a numeric keypad with digits 0-9, as well as a green ✓ and red ✘ buttons, typically used for yes / confirm and no / cancel, respectively.

Notice the small arrows next to the 8, 0, ✓, and ✘ keys. These arrows allow you to navigate the user menu:

  • 8 and 0 are used for Up and Down navigation.

  • ✓ and ✘ serve as Right and Left or Enter and Back buttons.

There are two ways to navigate the menu:

  1. Use the Up and Down keys to highlight the desired menu option, then press Enter or ✓ to select it.

  2. Directly press the number corresponding to the menu option you want.

To return to the previous menu, press Back or ✘.

Option 1

  1. Turn the unit on by pressing the button on the top left side.
    Result: The device displays the ready screen

  2. Press 0
    Result: The device displays the main menu showing the first 3 options. Option1 Information is highlighted.

  3. Press 00
    Result: The highlighted menu item moves to option 3 Power.

  4. Press ✓
    Result: The device moves to the sub-menu item Power, and displays the options

  5. Press 00
    Result: The highlighted menu item moves to option 3 Sleep After

  6. Press ✓
    Result: The device moves to the sub-menu item Sleep After and displays the options.

  7. Press ✓
    Result: As option 1 60 Secs is highlighted this action is executed and ultimately displays “setting 60s” before returning to the start-up screen.

Option 2

  1. Turn the unit on by pressing the button on the top left side.
    Result: The device displays the ready screen

  2. Press 0331
    Result: The device quickly moves through the submenus associated with the numbers pressed and ultimately displays “setting 60s” before returning to the start-up screen.

User Options

Keyek Card menu can be found by pressing 0. From there you can find:

1 - Information​

  • 1 - About ➔ Device codes and software versions

  • 2 - BLE ➔ Bluetooth ID and status

  • 3 - QR Code ➔ Displays Keyek Card ID in QR code and number format

​​​2 - Authentication

  • 1 - Show Password ➔ Used to access password vault

  • 2 - Change PIN ➔ Menu used when user chooses to change their PIN

  • 3 - Fido2

    • Delete Cred ➔ Delete a stored Fido credential

    • Delete all creds ➔ Delete all stored Fido credentials

​3 - Power

  • 1 - Battery details ➔ Displays data on battery state and charging

  • 2 - Sleep Now ➔ Puts device to sleep

  • 3 - Idle Time ➔ Sets time before device turns off

​4 - Updates

  • Used to manage firmware updates

​5 - User Settings

  • 1 - Brightness ➔ Allows user to adjust screen brightness (will help with power management)

  • 2 - Beep On/Off

  • 3 - Activate ➔ Manual Activation mode